HDTV

High-definition television (HDTV) is a television broadcasting system with a significantly higher resolution than traditional formats (NTSC, SECAM, PAL) allow. more...

Home
Amplifiers
Audio Accessories & Cables
Cable TV
DVD Players & Recorders
Digital Video Recorders, PVR
Gadgets & Other Electronics
Home Audio
Home Theater Projectors
Home Theater in a Box
Radios: CB, Ham & Shortwave
Satellite Radio
Satellite TV
Telephones & Pagers
Televisions
Accessories & Cables
Other
TV Antennas
TV Stands
Video Cables
Adapters, Converters
Analog
Digital, Non-HDTV
HDTV
HDTV Cables
S-Video Cables
Standard Cables
Coaxial
Component
Composite (RCA)
DVI
Other
S-Video
Video Selectors, Switches
Wall Mounts & Brackets
Direct-View Standard TVs
DVD/VCR Combo TVs
HDTV Receivers, Tuners
HDTVs, Direct-View
LCD Flat-Panel TVs
Other
Plasma TVs
Portable TVs
Rear Projection TVs
VCRs
Vintage Electronics

Except for early analogue formats in Europe and Japan, HDTV is broadcast digitally, and therefore its introduction sometimes coincides with the introduction of digital television (DTV): this technology was first introduced in the USA during the 1990s, by the Digital HDTV Grand Alliance (grouping together AT&T, General Instrument, MIT, Philips, Sarnoff, Thomson, and Zenith).

While a number of high-definition television standards have been proposed or implemented on a limited basis, the current HDTV standards are defined in ITU-R BT.709 as 1080 active interlaced or progressive lines, or 720 progressive lines, using a 16:9 aspect ratio. The term "high-definition" can refer to the resolution specifications themselves, or more loosely to media capable of similar sharpness, such as photographic film. Currently 11% of American households have HDTV's.

Notation

In the context of HDTV, the formats of the broadcasts are referred to using a notation describing:

The number of lines in the vertical display resolution.; Whether progressive frames (p) or interlaced fields (i) are used.; The number of frames or fields per second.;

For example, the format 720p60 is 1280 × 720 pixels, progressive encoding with 60 frames per second (60 Hz). The format 1080i50 is 1920 × 1080 pixels, interlaced encoding with 50 fields (25 frames) per second. Often the frame or field rate is left out, indicating only the resolution and type of the frames or fields, and leading to confusion . Sometimes the rate is then to be inferred from the context, in which case it can usually be assumed to be either 50 or 60, except for 1080p which is often used to denote either 1080p24, 1080p25 or 1080p30 at present but will also denote 1080p50 and 1080p60 in the future.

A frame or field rate can also be specified without a resolution. For example 24p means 24 progressive frames per second and 50i means 25 interlaced frames per second, consisting of 50 interlaced fields per second.

Most HDTV systems support some standard resolutions and frame or field rates. The most common are noted below.

Changes in notation

It should be noted that the terminology described above was invented for digital systems in the 1990s. Before that, analog TV had no true "pixels" to measure horizontal resolution, and vertical scan-line count included off-screen scan lines with no picture information while the CRT beam returned to the top of the screen to begin another field. Thus NTSC was considered to have "525 lines" even though only 486 of them had a picture (625/576 for PAL). Similarly the Japanese MUSE system was called "1125 line", but is only 1035i by today's measuring standards. This change was made because digital systems have no need of blank retrace lines unless the signal was converted to analog to drive a CRT.

Read more at Wikipedia.org