Batteries & Chargers

A battery charger is a device used to put energy into a cell or (rechargeable) battery by forcing an electric current through it. more...

Home
Amplifiers
Audio Accessories & Cables
Cable TV
DVD Players & Recorders
Digital Video Recorders, PVR
Gadgets & Other Electronics
Home Audio
Home Theater Projectors
Home Theater in a Box
Radios: CB, Ham & Shortwave
CB Radio
Ham Radio
Accessories
Antennas
Batteries & Chargers
Books, Manuals, Magazines
Cables & Adapters
Headsets & Earbuds
Keys
Microphones
Other Accessories
Power Supply
Speakers
Amplifiers
Meters
Oscillators & Filters
Other Ham Radio
Receivers
Transceivers
ICOM
Kenwood
Motorola
Other Brands
Yaesu
Transmitters
Tubes
Tuners
Other
Scanners
Shortwave Radio
Satellite Radio
Satellite TV
Telephones & Pagers
Televisions
VCRs
Vintage Electronics

The charge current depends upon the technology and capacity of the battery being charged. For example, the current that should be applied to recharge a 12 V car battery will be very different to the current for a mobile phone battery.

Types of battery chargers

Simple

A simple charger works by connecting a constant DC power source to the battery being charged. The simple charger does not alter its output based on time or the charge on the battery. This simplicity means that a simple charger is inexpensive, but there is a tradeoff in quality. Typically, a simple charger takes longer to charge a battery to prevent severe over-charging. Even so, a battery left in a simple charger for too long will be weakened or destroyed due to over-charging.

Timer-based

The output of a timer charger is terminated after a pre-determined time. Timer chargers were the most common type for Ni-Cd cells in the late 1990s for example.

Often a timer charger and set of batteries could be bought as a bundle and the charger time was set to suit those batteries. If batteries of lower capacity were charged then they would be overcharged, and if batteries of higher capacity were charged they would be only partly charged. With the trend for battery technology to increase capacity year on year, an old timer charger would only partly charge the newer batteries.

Intelligent

Output current depends upon the battery's state. An intelligent charger may monitor the battery's voltage, temperature and/or time under charge to determine the optimum charge current at that instant. Charging is terminated when a combination of the voltage, temperature and/or time indicates that the battery is fully charged.

For Ni-Cd and NiMH batteries, the voltage over the battery increases slowly during the charging process, until the battery is fully charged. After that, the voltage decreases, which indicates to an intelligent charger that the battery is fully charged. Such chargers are often labeled as a ΔV charger, indicating that they monitor the voltage change.

Fast

Fast chargers, made by VARTA and other companies, make use of control circuitry in the batteries being charged to rapidly charge the batteries without damaging the cells' elements. Most such chargers have a cooling fan to help keep the temperature of the cells under control. Most are also capable of acting as a standard overnight charger if used with standard NiMH cells that do not have the special control circuitry.

Read more at Wikipedia.org